A complete listing of the Kinetix 3 drive hardware and software . Connecting a drive to a PowerFlex 4L Series AC Drive with the 1203-SSS Converter. Connecting a drive to a PowerFlex 4L Series AC Drive with the 1203-USB converter. Connecting a drive to a PowerFlex 4L Series AC Drive with the EtherNet/IP (EIP) .
Connecting a drive to a PowerFlex 4L Series AC Drive with the 1203-USB converter. Connecting a drive to a PowerFlex 4L Series AC Drive with the EtherNet/IP (EIP) connection. Connecting a drive to a PowerFlex 4L Series AC Drive with the EtherNet/IP (EIP) connection. • A cable to connect to the PC is required.
Connecting a drive to a PowerFlex 40P AC Drive. Connecting a drive to a PowerFlex 40P AC Drive. • If the drive is an unformatted drive, there is no benefit from setting the
• The drive may be configured using the bundled software from your PC.
11. The 1203-USB converter converts the drive's parallel-port USB interface to a DSI interface. • • • The driver is loaded as a Windows service.
• • • The driver is loaded as a Windows service and the service starts automatically with the drive.
• • • •
The driver is loaded as a Windows service and the service starts automatically with the drive. • •
The driver is loaded as a Windows service and the service starts automatically with the drive. • The driver is loaded as a Windows service.
• •
Figure 16–2 Connecting a drive with a USB converter
•
The drive is configured in Disk Operating System Utility (Disk OSU).
•
The drive is configured using Disk OSU.
12. 25.
Chapter 3. The following sections describe each of the buttons on the 1203-USB converter. The following sections describe each of the buttons on the 1203-USB converter.
Press a button on the 1203-USB converter. In the Drives hardware view, select the .
To obtain both USB drivers required for the 1203-USB converter and USB serial port, perform the following steps. Go to the Allen-Bradley Web Updates website . • • • • • • •
Connecting a drive to a PowerFlex 4L Series AC be359ba680
Related links:
Comments